CertainTeed Type X fire resistant drywall is an interior gypsum board consisting of a solid set, fire resistive, Type X gypsum core enclosed in ivory-colored face paper and a strong liner back paper. CertainTeed Type X board features a specially formulated core providing fire resistance ratings when used in tested assemblies. Long edges are slightly tapered, allowing joints to be reinforced and concealed with joint tape and joint compound. CertainTeed Type X fire resistant drywall is available in a variety of lengths and widths.
Technical Specs
Installation
Warranty
Get Inspired and Learn More
Technical Information
Product Data:
- Thickness: 5/8" (15.9 mm)
- 宽度:4(1220毫米)标准/ 54”(1370毫米)
- Lengths: 8' to 12' / (2440 mm to 3660 mm)
- Edges: Tapered
- 包装:每包两块,面对面的和end-taped
Special widths, lengths or edges may be available on special order. Consult your CertainTeed sales representative.
Surface Burning Characteristics:
- CertainTeed Type X Gypsum Board has a Flame Spread rating of 15 and Smoke Developed rating of 0, in accordance with ASTM E 84, (UL 723, UBC 8-1, NFPA 255, CAN/ULC-S102).
- "UL Classified for Fire Resistance (ANSI/UL 263; ASTM E119) and listed under UL File No. CKNX.R3660"
- Applicable Standards: meets ASTM C1396.
Consult the GA-600 Fire Resistance Design Manual or UL Fire Resistance Directory, Volume 1 for specific information regarding the construction of fire resistance rated assemblies.
For complete Technical Data, please see the Product Data and Submittal Sheet.
See important Fire Safety Information.
Installation
CertainTeed Type X Fire Resistant Drywall accepts most types of paints, textures and wall covering materials. The surface shall be primed and sealed with a full-bodied latex primer before applying a final decorative material. This will equalize the suction between the joint compounds and the paper surface. For best painting results, all surfaces, including joint compound, should be clean, dust-free and not glossy. If glossy paints are used, a thin skim coat of compound over the entire surface, Level 5 finish, is recommended to reduce highlighting or joint photographing. This method is also recommended for areas of critical sidelighting of natural or artificial light sources. A sealer application under wallpaper or other wall coverings is also recommended so the board surface will not be damaged if the covering is subsequently removed during redecorating. Joint treatment must be thoroughly dry before proceeding with primer-sealer application and final decoration. Applicable Standards and References ASTM C840 GA0216 GA-214 Consult the GA-600 Fire Resistance Design Manual or UL Fire Resistance Directory, Volume 1 for specific information regarding the construction of fire resistance rated assemblies.
For complete installation instructions, please see Install Like the Pros, Gypsum Board Installation Guide.
Warranty Details
Please see the attached document for complete warranty details.
Warranty
Sustainability Information
CertainTeed takes pride in providing the best solutions to make the spaces where we work, live, and play healthier and safer. This means offering high-performing products that create better living environments.
Our products improve building energy efficiency and reduce building energy consumption for the life of the structure. As a result, they help conserve nonrenewable energy sources, decrease dependence on hydrocarbons and lower greenhouse gas emissions.
CertainTeed’s ongoing commitment to sustainability in our manufacturing operations incorporates the principles of industrial ecology, managing energy and water, and reducing waste.
Our ecomedes Sustainable Product Platform allows you to quickly access the product information and certifications you need, calculate contributions to LEED and other green building rating systems and create and save a group of products using the project feature. The information is free to access and always up to date.